Has anyone used swain tech coatings? Please post pics of work if so.

 

I have used them many times and I am happy with them. I use their exhaust coatings on almost everything I build now.

 

Best coatings by far I would post pics but i dont know how

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HT Chaplain &raquo;</TD></TR><TR><TD CLASS="quote"> would post pics but i dont know how </TD></TR></TABLE>

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by how to host a picture &raquo;</TD></TR><TR><TD CLASS="quote">
1- decide which picture you want to place here.

2- try to re-size it to a med size : 800x600

3- for resizing needs if you use Win XP : http://www.microsoft.com/windo....mspx
If you don't have XP try using a program such as Photoshop.

4- once you have the picture edited to a reasonable size you need to host it.
there are a few free ones out there, http://www.we-todd-did-racing.com is the main one to use then there are some others that I have found use full but you can only load one pic at a time. These are http://www.picuploader.com/ and http://imageshack.us/ .

5- Now that you have used one of these servers you will see a link, Cut and paste that on this site surrounded by [i m g] first and then [/i m g] last (just be sure to eliminate the spaces between the letters.)
</TD></TR></TABLE>

Ali

 

thanks ALI!!!!



Modified by HT Chaplain at 8:15 PM 8/14/2007

 

better pic of swain coating. Not my pic though.

It has a rough feel to it, kinda like rhino lining....it is 4X thicker than most other coatings, which are usually a powder coat type of coating and they suck. I have had all three, swain, other coatings and header wrap.

Swain tech is the sheit, best coating out there but header wrap is much cheaper and just as effective!

 

Im getting mine done next week. Ill be sure to post up pictures for everyone.

 

Ive used swain tech for several engines... pistons, bearings, valves, combustion chambers etc.

 

the coating is a light gray but you can paint it whatever color you want. I just used hight heat barbeque black paint

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mike1114 &raquo;</TD></TR><TR><TD CLASS="quote">

</TD></TR></TABLE>

I used to have an Apex'i header coated by swaintech, the coating was THICK not like the coating u would normally think of as being called ceramic. When I switched it out to an uncoated JDM 4-1 I would pop the hood and could tell there was more heat in the engine bay (I know its all relative)


i'm not completely sure but that maaaaay be a pic of the header I had, it looked exactly the same. i'll try to find some more pics in the vault

 

I have a JDM itr header and it is Swain tech coating. It is badass ****!! My header was coated about 4 years ago and still looks badass!!