I'm joining two 90* bends together, and I mate them. Well I can rotate them if I fix one of them, but if there both floating, they won't rotate, they move rather then rotate. Any tips or ideas ?

 

click on the rotate icon... then try again.

 

and dont have both float at the same time. its best to restrain(fix) at least one.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Lam.N &raquo;</TD></TR><TR><TD CLASS="quote">click on the rotate icon... then try again.</TD></TR></TABLE>

I did, the part moves back and forth in what seems like a little box.

 

hehehe so r u gettin any better? i dont have time to learn it but ill get to it soon ... hows rcautoworks comin along?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Lam.N &raquo;</TD></TR><TR><TD CLASS="quote">and dont have both float at the same time. its best to restrain(fix) at least one.</TD></TR></TABLE>

I know, but I need the whole part to rotate after I move one side.

 

i dont know what to tell you...

i been desiging manifolds on solidworks for a whlie now, and just as long as you cooperate with it. things will work out.

just rotate them individually. by deleteing the mates again. and starting from scratch.

other then that, i dont know what to tell you.

 

Whats an easy way to get flanges level together.