I want to replace my rear Quarter Panel on my teg, is this expensive to do, what am i looking at for prices??

 

I may have one if you need. Let me know I just shipped one for a guy.

 

I would say ~1500 for a used quarter painted and blended into the door.

 

i have the complete passenger side of a 90-93 teg coupe cut off from taillights to doorjam, rocker to roof. rust free.

 

How hard are they to replace? I need one for a 90 - 93 drivers side.

-Rob

 

they are a pain in the *** to replace sometimes, youv'e gotta drill out all the old welds, pry the old quarter off, sand down the area around the old welds. usually have to drill new holes in the new quarter for welding, then align it perfect. slap the bitch on, spot it. then grind down the new welds. bondo the overlaps, grind that down. seam seal around the replaced quarter. prep it for paint along the bondo and ****. its better left to someone who knows what they are doing. if you know what to do its a pretty cheap job did i forget anything?

 

yeah- the part about "and don't put so much heat into the weld when you put the new quarter on that it warps all to **** and you have to cut it off and do it again... with less heat"

 

I need to replace both sides on my 94, I would be happy with partials that would cover about 8 inches around the wheel well. If you have some please let me know. Or if anyone knows where I can buy them..

 

Send me some pictures of what you need for the 94. I have a 95 coming in next week I think. I got one for RaceCity_USA.