This is a chrome-moly cage in a 90 mustang coupe.
10pt cage with dash bar and sill bar--8.50's when certified
He went 10.73@129 here at 3500ft. N/A 399 ford motor
He's my tuner,great guy.




And a sun deck for a boat on the coast. All 6061.

Sorry the close-up is blurry...



Modified by 9bells at 7:21 PM 12/11/2006


Modified by 9bells at 7:22 PM 12/11/2006

 

Nice welds and fab, any schooling?

 

work looks top-notch
one thing-are those rear bars going to be legal on the Mustang with those bends?
chris

 

Yes that is how most of the bars are for the notch back

 

Thanks guys.
Yes, I attended technical training here in Alberta. Journeyman/red seal welder,
3rd class plate fitter.

The cage is built to spec by wolfe racecraft, it's fine. I just fit and welded it in.
It was not fun to get the holes in the rear decklid. He didn't want to take any glass out, so some very careful work with a zip-disc on a mini.
Also had to weld the dash-bar looking through the windshield, but it wasn't as bad.
All in all, love doing this stuff.

 

More pics of sundeck