will i got some flanges here for my exhaust and i want to weld them to the exhaust. what kinda prep is need for just MIG it? Its for a exhuast so it really doesnt have ot be pretty.

 

Just make sure you have a good connection, and the area that's going to be welded is clean, paint/rust free. Heating the flange up a bit will help. Other than that, flanges are pretty straight forward. Goodluck

 

Pour gas all over it and set it on fire for exactly 5 minutes then **** on it to put it out then it should be good to go

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by NAPIER &raquo;</TD></TR><TR><TD CLASS="quote">Pour gas all over it and set it on fire for exactly 5 minutes then **** on it to put it out then it should be good to go</TD></TR></TABLE>

A little excessive, but a torch is more like it. But very creative, I'll give you that.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by NAPIER &raquo;</TD></TR><TR><TD CLASS="quote">Pour gas all over it and set it on fire for exactly 5 minutes then **** on it to put it out then it should be good to go</TD></TR></TABLE>

HI this is not GDD.


Thank you.