Buying stainless
Thread Starter
Honda-Tech Member
Joined: Aug 2004
Posts: 83
Likes: 0
From: Houston, TX, US
Buying stainless
I'm just curious as to where you guys get your stainless piping from. I'm going to make my charge pipes out of stainless U bends so Ive been looking for some piping. Also this will be my first time welding stainless. Is it really easy to burn through? I will be using a stick welder. Do yall have any suggestions? Thanks
Junior Member
Joined: Dec 2001
Posts: 799
Likes: 0
From: PA, USA
Re: Buying stainless (jamartin0519)
Honda-Tech Member
Joined: Jan 2003
Posts: 3,788
Likes: 0
From: Charlotte, NC
Re: Buying stainless (Gpelsise)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 98AccordEX »</TD></TR><TR><TD CLASS="quote">expensive top quality pipes http://www.burnsstainless.com
lower prices http://www.kteller.com</TD></TR></TABLE>
This would be the thruth
lower prices http://www.kteller.com</TD></TR></TABLE>
This would be the thruth
Junior Member
Joined: Sep 2004
Posts: 185
Likes: 0
From: Cincinnati, Ohio, USA
Re: Buying stainless (jamartin0519)
I get all of my stainless from stainless works http://www.stainlessworks.net
that is the cheapest i can find it and i get a discount because i am a distributator so e mail me if you want some. Andrew_Burchett@mail.msj.edu
that is the cheapest i can find it and i get a discount because i am a distributator so e mail me if you want some. Andrew_Burchett@mail.msj.edu
Honda-Tech Member
Joined: Jan 2002
Posts: 5,178
Likes: 1
From: Raleigh, NC
Re: Buying stainless (98AccordEX)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 98AccordEX »</TD></TR><TR><TD CLASS="quote">
lower prices http://www.kteller.com</TD></TR></TABLE>
Last I checked, JCWhitney had about the cheapest prices if you're not picky about gauge.
lower prices http://www.kteller.com</TD></TR></TABLE>
Last I checked, JCWhitney had about the cheapest prices if you're not picky about gauge.
Junior Member
Joined: Dec 2001
Posts: 799
Likes: 0
From: PA, USA
Re: Buying stainless (JeffS)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JeffS »</TD></TR><TR><TD CLASS="quote">
Last I checked, JCWhitney had about the cheapest prices if you're not picky about gauge.</TD></TR></TABLE>
i would rather pay more to support people on this site than some big company. but thats just me
Last I checked, JCWhitney had about the cheapest prices if you're not picky about gauge.</TD></TR></TABLE>
i would rather pay more to support people on this site than some big company. but thats just me
Thread
Thread Starter
Forum
Replies
Last Post
TurboLSVtecTeg
Forced Induction
5
Feb 3, 2004 06:25 PM