WTB: DPFI -> MPFI conversion
10-21-2004, 12:01 PM
#1
Member
Thread Starter
Join Date: Dec 2003
Location: Orlando, UCF, FL, Broward
Posts: 1,048
Likes: 0
Received 0 Likes
on
0 Posts
WTB: DPFI -> MPFI conversion
I need the 4th generation Civic/CRX Si ECU (PM6), D16A6 distributor (if you don't have, its ok), complete Intake Manifold (including injectors, fuel rail, throttle body, etc), Resistor box (89-91 SI), SI wiring harness, the manifold support bracket, the SI fuel line from the fuel filter to the fuel rail (since there is a honda dealer very close to me, you don't have to have this, but i would like to buy it).
I have the soldering gun, wire, and heat shrink. I will also buy the intake manifold gasket from the honda dealer. The method payment that will be used with either be check or paypal. Whichever is most convenient for you.
I have the soldering gun, wire, and heat shrink. I will also buy the intake manifold gasket from the honda dealer. The method payment that will be used with either be check or paypal. Whichever is most convenient for you.
Thread
Thread Starter
Forum
Replies
Last Post