Wrong linkage? No 5th or reverse
Thread Starter
Trial User
Joined: Jul 2017
Posts: 2
Likes: 0
Wrong linkage? No 5th or reverse
Hey guys just did my first swap. 91' B18A1 into 93 EG and used a LS hydro trans. I used the linkage from the DA integra that came with the swap. After it's all said and done I cannot get the car into reverse or 5th gear. Before ripping the trans apart I just wanted to know if possibly I'm using the wrong linkage. Should I be using 94'-00' integra linkage? I've searched and searched before posting but have found answers in both directions. Just looking for a definitive answer here. Thanks!
Re: Wrong linkage? No 5th or reverse
Im pretty sure you have to use a 94-01 linkage or even an EM1 linkage.
Put your car on jack stands, remove linkage, stick a screwdriver through the bitch pin hole and see if it'll go into 5th and reverse that way. If you catch those gears you know your problem is the linkage.
Put your car on jack stands, remove linkage, stick a screwdriver through the bitch pin hole and see if it'll go into 5th and reverse that way. If you catch those gears you know your problem is the linkage.
Thread Starter
Trial User
Joined: Jul 2017
Posts: 2
Likes: 0
Re: Wrong linkage? No 5th or reverse
Im pretty sure you have to use a 94-01 linkage or even an EM1 linkage.
Put your car on jack stands, remove linkage, stick a screwdriver through the bitch pin hole and see if it'll go into 5th and reverse that way. If you catch those gears you know your problem is the linkage.
Put your car on jack stands, remove linkage, stick a screwdriver through the bitch pin hole and see if it'll go into 5th and reverse that way. If you catch those gears you know your problem is the linkage.
Thread
Thread Starter
Forum
Replies
Last Post
Anti-Drama Queens
Hybrid / Engine Swaps
4
Apr 8, 2006 05:27 PM