does anyone have the procedure for changing out the master and slave cylinder? my clutch pedal is currently chillin on the floor.
Thanks in advance

 

Before you do any of this check and see if you just need more fluid. You use Dot 3 brake fluid. Then bleed it like you bleed a brake. Drain fluid. Undo the clutch line with a 10mm LINE WRENCH. Remove 2 10mm and 2 12mm bolts. Remove pin from clutch pedal. Replace with new parts, bleed clutch. Thats the jist of it. Just get in your car and look its pretty basic stuff. Good Luck

 

i already checked the fluid. its good.