Action Clutch selection
#1
Honda-Tech Member
Thread Starter
Action Clutch selection
I am needing a new clutch and flywheel for my 400hp turbo B series, and from everything I've read and looking at the prices I think I am going with Action Clutch.
Questioning the holding capacity though and wanted to see what others' experience with Action Clutches have been.
My options are the
-1MS/1MD which state a 170% increase in torque capacity....
-2MS/2MD which are 200-400% increase and would be plenty/overkill
- Planning to get their 10lb chromoly flywheel
If I go based off the stock torque numbers from my transmission which would be a B18b1 that's 120lb/ft. Does that mean the 1MS clutch will safely hold 324lb/ft of torque?
If so, I think I will be okay with that option. I don't want to overdo it since it is a street car.
The car made 400whp on the dyno at 17psi from the previous owner, but I don't know the torque number.
Questioning the holding capacity though and wanted to see what others' experience with Action Clutches have been.
My options are the
-1MS/1MD which state a 170% increase in torque capacity....
-2MS/2MD which are 200-400% increase and would be plenty/overkill
- Planning to get their 10lb chromoly flywheel
If I go based off the stock torque numbers from my transmission which would be a B18b1 that's 120lb/ft. Does that mean the 1MS clutch will safely hold 324lb/ft of torque?
If so, I think I will be okay with that option. I don't want to overdo it since it is a street car.
The car made 400whp on the dyno at 17psi from the previous owner, but I don't know the torque number.
Thread
Thread Starter
Forum
Replies
Last Post
boostedhks
Honda Civic / Del Sol (1992 - 2000)
1
08-22-2008 05:06 AM