I've found a ZC exhaust manifold for my '87 teg motor; which downpipe will fit this manifold? BTW the teg motor is in my '84 CRX.

Thanks guys.

yours

The ZC manifold has two openings; the teg, only one. No matter because I've found one from a Civic. Only problem is the flange is angled too high. I'm going to try to modify it by cutting the twin pipes at the bend, angling them downward and adding a three or four inch section of pipes to lengthen them somewhat as well as welding a new O2 sensor bung at the junction because the stock O2 sensor location is behind the manifold and trying to replace the sensor will be next to impossible.