Where are you guys usually launching at? I launch at 3k and notice that it spins quite a bit...maybe Im not launching high enough though...I've got BFG G-Force tires with lots of thread left. The motor is a JDM B16A with basic bolts on's plus ITR cams. All this is on an EK by the way.

 

Just try launching at different rpms. I cant tell you what I launch at, I just listen to the motor and go by the noise. lol

-Jason

 

get some slicks and race axles.. then launch at redline..

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dmacaalay &raquo;</TD></TR><TR><TD CLASS="quote">get some slicks and race axles.. then launch at redline.. </TD></TR></TABLE>

Lol. Try that and take a video and post it here.

-Jason

 

If I lauch too low, the car will die, if I lauch too high, it just spins and I loose valuable time. I have never tried lauching at redline.

 

never tried launchin at redline?? TRY IT!! haha.. jk.. DONT! honestly which rpm to launch at depends on your setup.. when i had my stock b20vtec in my integra on street tires, i kept launching at about 3.5k rpm.. any lower and its a slow launch and any higher my car was wheel hopping and/or spinning.. but now im building my all motor gsr and got all my motor mount inserts and traction bar, so i have no idea where to launch at..

 

i dont think it matters what RPM you launch at aslong as you know how/when to release the clutch. you can have it at 2rpm and release the clutch slowly as ur pressing the gas, that will give u nice GRIND and a decent start. sometimes i just pop my clutch while giving more gas at the same time and i barely get a chirp but a big launch.
i dont even have that much power, 135whp i think.
over 3rpms plus popping the clutch will make ur tires spin

 

ok epeen.. since it doesnt matter which rpm you launch at "as long as you know how to release the clutch", then try poppin it at redline.. hehe..

 

I launch around 3.5k - 4k and I spin a little, but not much