When Separating Front Hub from Spindle, Do I need to Replace Wheel Bearing?
Thread Starter
Honda-Tech Member
Joined: Feb 2001
Posts: 693
Likes: 0
From: Eastern, ma, US
When Separating Front Hub from Spindle, Do I need to Replace Wheel Bearing?
I need to replace a couple of damaged wheel studs. To do this I need to separate the hub from the spindle (any advice on this?).
Will I trash the front wheel bearing in this process? With 86K miles on the ITR, should I just replace the wheel bearings regardless?'
Paul
Will I trash the front wheel bearing in this process? With 86K miles on the ITR, should I just replace the wheel bearings regardless?'
Paul
Trial User
Joined: Sep 2000
Posts: 543
Likes: 0
From: New York, NY, USA
Re: When Separating Front Hub from Spindle, Do I need to Replace Wheel Bearing? (pcorad)
I reused mine last time...but aways a good idea to replace it. (The bearing needs to be pressed out anyway.)
Member
Joined: Jul 2001
Posts: 1,214
Likes: 0
From: columbus, ohio
Re: When Separating Front Hub from Spindle, Do I need to Replace Wheel Bearing? (pcorad)
You don't have to replace the bearing- you should be fine as long as you don't get a bunch of dirt on the bearing or race.
Thread
Thread Starter
Forum
Replies
Last Post
ketchup
Honda CRX / EF Civic (1988 - 1991)
17
Jun 27, 2008 09:02 PM
pcorad
Acura Integra Type-R
2
Nov 7, 2001 08:41 AM
