I'm about to replace my headgasket on my b16 just wondering if there are any washers, or any other gaskets needed besides the headgasket when replacing it?

 

you might as well do the basics like timing belt,water pump,cam seals,and if you have a vtec head theres a small dowl pin and o-ring under the middle cam cap.also you will need an im gasket if you remove it.

 

where would be a good place to get the small dowel pin and o-ring? also where is a good place to get new cam seals? one of mine is leaking now. where can i get a new water pump and timing belt? any good websites to buy these parts off of?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by B16Civic93 &raquo;</TD></TR><TR><TD CLASS="quote">where would be a good place to get the small dowel pin and o-ring? also where is a good place to get new cam seals? one of mine is leaking now. where can i get a new water pump and timing belt? any good websites to buy these parts off of?</TD></TR></TABLE>

http://www.hondaautomotiveparts.com

 

anything else? i really couldnt find anything that i was looking for on that website, unless i just wasnt looking in the right places, i dunno any help is appreciated.

 

if front main seal is leaking or need to be changed, change it, that's pretty much it besides the stuff sickerhatch said before