i have a 96 civic ex , just swapped a 92 ls in it what ecu or program should i use

 

you should get a conversion harness from obd2 to obd1. and use an obd1 ls computer. assuming you rewired the ex harness.




Modified by brick top at 10:15 PM 1/16/2007

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by red beast &raquo;</TD></TR><TR><TD CLASS="quote">i have a 96 civic ex , just swapped a 92 ls in it what ecu or program should i use</TD></TR></TABLE>

dosnt matter what obd1 ecu you use p28 p30 what ever it is just make sure and chip it and then put &lt;crome&gt; hondata on there

you can download a base map from the internet to get you started with all that but this has been covered a million times!

oh and do not forget the harness

oh and search is your friend!

 

If it is just a fairly stock car and you want to get it running well, just throw a stock OBD1 P75 in there with an OBD2 to OBD1 conversion harness like previously stated.

Or you could run the OBD2 P75 and jump some wires to get rid of the CKF code.