my valves need to be adjusted on my 95' ls swap. Is this easy to do. what tools do i need and where can i find the measurements they need to be adjusted too. please help me out and give me a how too. i need to learn how to do this stuff. thanks in advance.

 

TOP

 

This is for a Vtec motor but still gives you an good idea of the process ....

http://www.c-speedracing.com/h...m.php

Get yourself a helms manual and you should be in good shape.

 

you need the appropriate feeler gauges, screwdriver, 12mm wrench, 19mm socket, and 1/2" ratchet. Check online for lash specs. adjust the valves at TDC for each cylinder starting with #1 then, 3, 4, 2. Turning the motor 90 degrees on the cam each time

 

thank you so far