VAFC problem

Reply Subscribe

Thread Tools

Search this Thread

Sep 3, 2003 | 09:49 PM

emissionsux

Thread Starter

Member

Joined: Feb 2003

Posts: 1,076

Likes: 0

VAFC problem

I just connected a VAFC in my car and the display isn't working. Anyone know what the problem could be? Thanks.

Sep 3, 2003 | 10:29 PM

Kamin

Honda-Tech Member

Joined: Sep 2001

Posts: 12,176

Likes: 2

From: Tucson, AZ

Re: VAFC problem (emissionsux)

you wired it wrong, check everything again

Sep 3, 2003 | 11:45 PM

.xcalibur.

Junior Member

Joined: Jul 2003

Posts: 898

Likes: 1

From: So, Cal

Re: VAFC problem (emissionsux)

make sure the black, brown, red, and orange wires are hooked up properly.
The VAFC should light up with just those 4 connected. make sure you have the brown wire closer to the ecu as well.

Sep 4, 2003 | 07:40 AM

emissionsux

Thread Starter

Member

Joined: Feb 2003

Posts: 1,076

Likes: 0

Re: VAFC problem (.xcalibur.)

I did that, only the buttons light up but the screen doesn't. The VAFC is used so not sure it even works. If the VAFC didn't power up, won't it throw codes for the wires that were bypassed?

Sep 4, 2003 | 11:19 AM

.xcalibur.

Junior Member

Joined: Jul 2003

Posts: 898

Likes: 1

From: So, Cal

Re: VAFC problem (emissionsux)

with those 4 wires hooked up and the screen doesnt light up then its broken and totally useless. Let me know if you wanna sell it..cause i might have a few friends who can fix it.

Sep 4, 2003 | 01:23 PM

emissionsux

Thread Starter

Member

Joined: Feb 2003

Posts: 1,076

Likes: 0

Re: VAFC problem (.xcalibur.)

That was what I was thinking because if power wasn't going through it, it would throw codes for the sensors that's wires I had to bypass. Thanks for the help.