ok couple of questions on the vafc hack
on the narrow and wide settings we have lvt and hvt setting with a couple crossing each other for example
narrow
lvt-----------------hvt
1000 -35
1500 -40
2000 -40
2500 -39
3000 -39
3500 -38
4000 -38_____ 4000 ?
4500 -37_____ 4500 ?
_____________5000 -36
_____________5500 -35
_____________6000 -34
_____________6500 -34
_____________7000 -33
_____________7500 -33
_____________8500 -32

is the 4000 & 4500 on the lvt and hvt going to be the same or a little different?
and the closer I get to 0 the richer I am right?
thanx
RaVeN

 

Post your question in the Forced Induction forum, they might have the answers to your questions.

 

That difference in %'s is real negligable, but you should be ok till you can get to a dyno.

I found in my setup I added a SHITLOAD of fuel around 3-4000rpms and gained loads of low-mid torque up top only a tad of fuel was added. runninga 12.0-12.4 A/F ratio right now.

Yes the closer to 0 you get the richer you are.