ok.. i know came cross a problem with the wire issue with my alternator
i checked the engine harness plugs it tells me USDM 4 wires/CDM 3 wires
so now this is what i need to know
the alternator i have is the 3 wires design and the plugs i have has 4 wires..

USDM
1. Blk/YEL
2. WHT/GRN
3. WHT/BLU
4. WHT/RED

CDM
1. WHT/RED
2. BLK/YEL
3. WHT/BLU

so basically what i did was i wired them up to the CDM spec and left WHT/GRN alone on the side...
now car starts fine.. it charges the battery as well but my dash lite for the battery stays on, how do i kill it?
i found out that the WHT/GRN i left is ALTC(Alternator control) which sends alternator control signal out... if i switch it from WHT/BLU to WHT/GRN would the problem be fixed? i do not want to mess with my wires even i already did.. but i am hoping someone who knows this can help me out

thanks a lot