Trying to rip a chip.
Thread Starter
Honda-Tech Member
Joined: Sep 2004
Posts: 1,168
Likes: 1
From: ATX
Trying to rip a chip.
I am trying to rip a chip that my friend gave me. Yet, everytime i load it in uberdata, i get errors. Can i email the .bin to someone to check the chip to see whats on it before i erase it? Thanks
Member
Joined: Nov 2003
Posts: 2,274
Likes: 3
From: 92127
Re: Trying to rip a chip. (B16aDasher)
It's P30 codebase, that's why you had errors with Uberdata.
Open a P72 and try to import it as a P30.
I believe this is commonly referred to as the "Greddy Turbo Chip" by most. It is a hack of a regular P30 program designed to dump massive fuel at WOT. Could be used for N2O as well.
7400 RPM Revlimit
5500 RPM VTEC
Knock Sensor disabled
ELD disabled
PA Sensor disabled
Injector Test disabled
o2 Sensor Heater disabled
VTEC Speed Check Disabled
o2 Sensor Disabled
Closed Loop disabled
Low cam timing sucks.
Injector duty cycle over 100% at high RPM.
In my opinion you won't lose anything valuable when you erase it.
Open a P72 and try to import it as a P30.
I believe this is commonly referred to as the "Greddy Turbo Chip" by most. It is a hack of a regular P30 program designed to dump massive fuel at WOT. Could be used for N2O as well.
7400 RPM Revlimit
5500 RPM VTEC
Knock Sensor disabled
ELD disabled
PA Sensor disabled
Injector Test disabled
o2 Sensor Heater disabled
VTEC Speed Check Disabled
o2 Sensor Disabled
Closed Loop disabled
Low cam timing sucks.
Injector duty cycle over 100% at high RPM.
In my opinion you won't lose anything valuable when you erase it.
thats scary. lol thats probably why he gave me this chip to erase.
Thread
Thread Starter
Forum
Replies
Last Post