I've got the motor together, but will still be a bit before its dropped in while getting the chasis ready. Any ideas what all motor HP can be expected out of this setup?
B16a head- completely stock
skunk2 intakemanifold
b20b block -GE sleeves 84.5mm
Endyn roller waves
eagel rods
Hondata s200 - tuend to about 12.5:1 A/F
C/R is 9.8:1
stock stroke

 

oh man thats gotta be like 1200 hp... jking man... sorry im an ***

sounds like a good set up tho =D

 

every engine is diff. I would say 180 to the wheels