-Justin-

Hey guys. I have a cable ls transmission sittin in tha basement. I don't know what year car it came out of. Is there any way to tell what car it is from by counting the teeth on the imput shaft or anything. I can't check the badge number on the trans to tell, because there isn't one.
TIA

colin161822

could pop axles in it and could the rotation, to figure out final drive. that would determine if it is a vtec.

-Justin-

well i know it's not vtec, since it's ls. plus i dont have axles layin around to put in it

-Justin-

colin161822

then the year doesnt make difference. its a ls, thats about all slang it as a cable ls trans.

-Justin-

well according to the person wanting to buy mine, there are differences in the input shafts

Kataku2K3

Tho I don't see too many LS cable trannies... Count the splines on the mainshaft and let me know how many you find, I'll let you know if it's considered the big or little shaft... I know the VTEC ones only because I work with them more often and you'll either have the big shaft or the small one... Y1/S1/J1 are normally all have the small shaft where as the YS1 runs the big shaft... But yea, let me know and I'll get back to you as soon as possible...

-Justin-

it's got 24 teeth on the input shaft. im about certain its a 90-91