OK I HAVE A EF SWAPPED WITH A SOHC ZC I SPUN THE ROD ON MY OLD ZC BLOCK SO I BOUGHT A LONGBLOCK SOHC ZC BUT IT WAS THE CARBURATED ONE,SO ONLY THING I BASICALLY DID WAS SWAP SHORT BLOCKS.WHILE I SWAPPED THE BLOCKS I DECIDED TO CHANGE THE CLUTH SO I BOUGHT A NEW CLUTCH FOR THE MOTOR,BEARING,FLYWHEEL,ETC ,NOW MY PEDAL GOES ALL THE WAY TO THE FLOOR WITH THE ADJUSTMENT ALL THE WAY UP.ITS A SI TRANNY I TOOK IT APART AND I NOTICED THE BEARING WASNT EVEN HITTING THE CLUTCH WHEN ENGAGED ,I WANTED TO KNOW WAT MY PROBLEM IS,OR IF THEY MAKE A LONGER THROW OUT BEARING JUST SO THE CLUTCH WILL HIT IT WHEN ENGAGED????????SOMEONE PLZZ HELP IM SERIOUSLY STREESIN

 

plzzz help

 

anyone?

 

hello

 

Is there anything physically different in any of the parts you replaced from the previous ones that worked?