i have a second gen b16a and i'm going to take the head off, and replace the cams and such. i am wondering what the torque specs and patterns are for the head, and for the cam caps and anything else i should know when doing this. are there any websides that tell you this?

 

Head bolt pattern:
9 5 1 3 7
8 4 2 6 10

Step 1: 22 ft-lbs
Step 2: 61 ft-lbs

There's the for the head. I have the cam holder sequence also...but I don't want to confuse you. This is looking into the engine bay at the head.