Okay, I've been looking for the torque specs for a set of b18c headstuds but can't seem to find it in the archives. If anyone has them, please post em. Thanks.

 

anyone?

 

the torgue spec will be for what ever your torquing down.. if its your head.. it would be what your head should be torgued to witch is 72 ft-lbs.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by havok hybrid &raquo;</TD></TR><TR><TD CLASS="quote">the torgue spec will be for what ever your torquing down.. if its your head.. it would be what your head should be torgued to witch is 72 ft-lbs. </TD></TR></TABLE>

that's oem specs though, correct? wouldn't aftermarket be slightly higher? i'm using the aebs studs.

 

no, motor specific. find any repair manual and it will tell you the specs, it'll be in two stages though. go around in order for the first step, then again for the final torque down.

 

i just want to confirm that the aebs studs do not need to be torqued any higher than oem studs. like my arp rod bolts required higher torque specs. just wanting to verify.