tool question for valves
Member
Joined: Dec 2001
Posts: 2,247
Likes: 0
From: SoCal, USA
Re: tool question for valves (2k.civic.si)
YA8880,$51.20
Or for about $7.00 you could make one.
Go to the hardware store and buy a cheapie 10mm deep socket and I think a 14mm wrench(just find one that barely fits over the socket) then hammer the closed end over the socket.
Like this.
Borrowed pic.
I have done this and it works good.
edit- https://honda-tech.com/zerothread?id=557944
Or for about $7.00 you could make one.
Go to the hardware store and buy a cheapie 10mm deep socket and I think a 14mm wrench(just find one that barely fits over the socket) then hammer the closed end over the socket.
Like this.
Borrowed pic.
I have done this and it works good.
edit- https://honda-tech.com/zerothread?id=557944
Thread
Thread Starter
Forum
Replies
Last Post
littleblue
Honda Civic / Del Sol (1992 - 2000)
3
Aug 10, 2008 05:08 PM