Are these vacuum lines hooked up correctly?
Thread Starter
Junior Member
Joined: Jul 2002
Posts: 594
Likes: 0
From: Portland, ORYGUN
Are these vacuum lines hooked up correctly?
Could you guys help me figure out if these vacuum hoses are correct? I have a CRX with a first gen B16. I need it to be right for emissions testing. Thanks a lot! 
[Modified by T~Rex, 4:01 PM 2/5/2003]
[Modified by T~Rex, 4:01 PM 2/5/2003]
Thread Starter
Junior Member
Joined: Jul 2002
Posts: 594
Likes: 0
From: Portland, ORYGUN
Re: Are these vacuum lines hooked up correctly? (1SlowB16EF)
all looks good to me!
Also, in the diagram it shows a tube that goes to the intake, but I already have the intake tube going to that hole on the valve cover...
[Modified by T~Rex, 10:31 PM 2/6/2003]
Honda-Tech Member
Joined: Sep 2001
Posts: 8,080
Likes: 0
From: LEISURE RULES
Re: Are these vacuum lines hooked up correctly? (T~Rex)
just as a reminder sometimes the smog officers are not so forgiving when you use non oem hoses...so if you can get the proper lines and dont use those lines when your inspection takes place.
Thread Starter
Junior Member
Joined: Jul 2002
Posts: 594
Likes: 0
From: Portland, ORYGUN
Re: Are these vacuum lines hooked up correctly? (eg6si)
Could anyone else confirm the correct hook up of the vacuum hoses? My idle is high, so I'm thinking it could be the vauum hoses...but I guess there could be a leak, even if they are hooked up correctly, couldn't there?
Thread
Thread Starter
Forum
Replies
Last Post
ryanevansoh
Honda CRX / EF Civic (1988 - 1991)
15
Sep 2, 2009 09:55 AM
crxb18a1
Honda Civic / Del Sol (1992 - 2000)
4
Mar 1, 2005 12:45 PM