Ok, well my crankshaft pulley key sheared the other day...Any clever ideas on how to remove the pulley??


Modified by blueg9 at 4:04 PM 8/13/2005


Modified by blueg9 at 4:07 PM 8/13/2005

 

bump, need some help

 

wedge something in the flywheel teeth??? i dunno just guessin

free bump

 

yeah I tried that but it's hard to find something small enough to fit in the small teeth clearance that is actually strong enough to hold the torque necessary to loosen it...thanks for the suggestion...

 

have u tried something called a prying screwdriver?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hAILO &raquo;</TD></TR><TR><TD CLASS="quote">have u tried something called a prying screwdriver? </TD></TR></TABLE>

WTF?? No..

 

ummm i think i used a ball joint remover or something like that it has 3 little legs and a screw..here is a pic.works wonders

the last one onthe page is what i have

http://www.matcotools.com/Cata...elect

 

no wait i think i have the 2 ton...def. didnt spend $121 on the 7 ton

 

alright, I have one of those but I should've explained a little better what's going on...The pulley is loose, probably like an inch of play either was so it's loose and I think that the screw is like a thread or two out already...But it still doesn't move ...Could it be seized into the crank? How could I find out?

 

wait, so you think the bolt going into the crank is seized? is that whats going on?

 

it's chill, i got it...just haven't been on to lately...Nothing the impact wrench couldn't fix, just had to find one..Thanks for the help everyone