I have some eagle h beam rods connected to srp pistons and im trying to get them apart. What tool or method do yall go at taking them apart? It looks like theres a clip on each side I need to get out. But I know im not going to be able to get it with a small flathead. Any help would be appreciated. Nick

 

You'll need a good needlenose plyer to unseat the locking ring.

 

so regular needle nose pliers should work? I dont know how they would be small enough to get that clip out but ill try out your advice. Nick

 

Snap ring pliers make life easier...

 

the easiest way would be to go to machine shop n let them press it out!

 

Or just take the snap ring out and watch the pin fall on the ground.