stroker theories?
could you theoretically take a b16, resleeve and bore to 86mm, then use an LS crank, aftermarket pistons, and LS rods, with a b16 head on it, and it all work.? may be dumb, but im curious. lemme know what u think. (at least can someone flame me if im totally out of line?)
[Modified by hybridvteceg, 5:28 PM 10/21/2002]
[Modified by hybridvteceg, 5:28 PM 10/21/2002]
You would have to increase the deck height to make those parts work right.
Otherwise you will need custom rods and pistons and suffer from incredibly bad
internal geometry
Otherwise you will need custom rods and pistons and suffer from incredibly bad
internal geometry
Trending Topics
how do you increase deck height
some company down in san diego had a spacer on a b18 to make 2.? so to be able to get the correct rod stroke ratio. it was in sports compact car magazine. mucho dinero
Thread
Thread Starter
Forum
Replies
Last Post
94tegra
Acura Integra
7
Jan 26, 2004 12:16 PM



