Stroker kit for the b16
Thread Starter
Junior Member
Joined: Dec 2001
Posts: 701
Likes: 0
From: Denial
Stroker kit for the b16
From what I've read, most company's just use the b16c crank with custom pistons. I was wondering if anyone knew if this were true with the HKS stroker kit as well. If so can anyone recomend any good stroker kit for the Si, my piston rings are fried (long story, no nitrous involved) so I figure since I gonna rip apart the engine anyway, might as well have something to show for it. All comments appreciated.
Honda-Tech Member
Joined: Mar 2002
Posts: 511
Likes: 0
From: San Diego, Ca
Re: Stroker kit for the b16 (audiobahnman)
the 1st gen gsr crank and rods will fit since the b16 and b17 use the same block, with them alone youll get 1.7l then bore it out and drop in oversized pistons
Honda-Tech Member
Joined: Dec 2001
Posts: 5,418
Likes: 5
From: Gresham, Oregon, USA
Re: Stroker kit for the b16 (SOHCwarrior)
A nice setup would be to notch the block a bit, drop a GSR crank and rods, then get custom pistons. My friend has this setup in his EG with CTR cams and it pulled a 12.7 @ 108. Have fun
Thread
Thread Starter
Forum
Replies
Last Post
BennyS
All Motor / Naturally Aspirated
45
Apr 19, 2016 10:27 PM
Cidone
Honda Civic / Del Sol (1992 - 2000)
5
Oct 1, 2004 04:43 AM
Irishweird00
All Motor / Naturally Aspirated
11
Jun 5, 2003 06:51 PM