Started building a motor...wrong damn rods came in :(
Thread Starter
Joined: Mar 2002
Posts: 888
Likes: 0
From: macon, ga, USA
Started building a motor...wrong damn rods came in :(
Went to build my motor with the hopes of having it ready by the weekend... and i started plastiguaging everything, crank bearings all were fine. So for the first time sat the rod on the crank, and the som-bitch didnt fit. I ordered for a GSR and they fit an LS.
Im thinkin about just tryin to find an LS crank and Stroke my GSR since my pistons are 84mm anyway.
One thing ive learned about building motor is... ***** never gonna work out the first time.
Im thinkin about just tryin to find an LS crank and Stroke my GSR since my pistons are 84mm anyway.
One thing ive learned about building motor is... ***** never gonna work out the first time.
Thread Starter
Joined: Mar 2002
Posts: 888
Likes: 0
From: macon, ga, USA
Re: (91tegrals)
Yea, CP pistons and Crower rods. I bought em from Cheapturbo.com, Ken read me the part # for the rods and i checked em on crowers web site and they matched the GSR rods...
But if this Stroker motor works out it will be way cooler, more torquey
But if this Stroker motor works out it will be way cooler, more torquey
Thread
Thread Starter
Forum
Replies
Last Post
PACT man
All Motor / Naturally Aspirated
1
Jan 19, 2009 12:59 PM