Tech / Misc Tech topics that don't seem to go elsewhere.
Sponsored by:
Sponsored by:

sound of vtec engagment

Thread Tools
 
Search this Thread
 
Old Mar 2, 2003 | 08:33 PM
  #1  
NightHawkC5's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Nov 2002
Posts: 512
Likes: 0
From: Glendale, CA, USA
Default sound of vtec engagment

pleae post some of the loudest v-tec engagments sound or vids
Reply
Old Mar 2, 2003 | 08:55 PM
  #2  
tominos's Avatar
Honda-Tech Member
 
Joined: Nov 2002
Posts: 2,662
Likes: 0
From: Eugene, Portland
Default Re: sound of vtec engagment (NightHawkC5)

1. s2000

2. rsx type s
Reply
Old Mar 3, 2003 | 01:19 AM
  #3  
Kataku2K3's Avatar
Honda-Tech Member
 
Joined: Dec 2001
Posts: 5,418
Likes: 5
From: Gresham, Oregon, USA
Default Re: sound of vtec engagment (tominos)

Here's a vid that I made a few months ago... It's nothing special but i put a few of my friend's cars in it... Most of these motors are running OE cams... Chan's EK at the beginning is a CRVTEC running just a CTR IN cam and his X-over i pretty loud... You'll hear it on Brian's red EG too... You really hear their VTEC best when their motors bog which isn't too often... Oh well tho.. Again it's nothing special and right around 140mb so dial up beware... http://oregonstate.edu/~uyemuraa/Video/ Right click and save target as on GZ Woodburn Video1.mpg...
Reply
Old Mar 3, 2003 | 03:52 PM
  #4  
NightHawkC5's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Nov 2002
Posts: 512
Likes: 0
From: Glendale, CA, USA
Default Re: sound of vtec engagment (Kataku2K3)

ttt
Reply
Old Mar 3, 2003 | 05:21 PM
  #5  
junb16's Avatar
 
Joined: Sep 2002
Posts: 78
Likes: 0
From: houston, tx, usa
Default Re: sound of vtec engagment (NightHawkC5)

thats a damn good video you got. good quality what kinda camera is that so i can make a video of my own. haha
Reply
Old Mar 3, 2003 | 06:37 PM
  #6  
Kataku2K3's Avatar
Honda-Tech Member
 
Joined: Dec 2001
Posts: 5,418
Likes: 5
From: Gresham, Oregon, USA
Default Re: sound of vtec engagment (junb16)

It's just a Sony TRV-950... I barrowed my friend's .45 wide angle lense which gives pretty good view of the whole cabin when mounted on my custom little bracket.... Peace
Reply
Old Mar 3, 2003 | 06:58 PM
  #7  
Cuong-nutz's Avatar
Member
 
Joined: Feb 2002
Posts: 1,325
Likes: 1
Default Re: sound of vtec engagment (Kataku2K3)

Damn dial-up
Reply
Old Mar 5, 2003 | 07:52 AM
  #8  
advanracing62's Avatar
Honda-Tech Member
 
Joined: May 2001
Posts: 2,244
Likes: 0
From: Boise, ID
Default Re: sound of vtec engagment (Cuong-nutz)

here's my stock B16 with JUN III cams- if you can't hear VTEC engage then I don't know what to tell you...

http://www.we-todd-did-racing.com/we...MxeTU0MQ%3D%3D
right click save as PLEASE 14.8 mb
Reply
Old Mar 5, 2003 | 08:36 PM
  #9  
boi-alien's Avatar
 
Joined: Nov 2002
Posts: 67
Likes: 0
Default Re: sound of vtec engagment (Cuong-nutz)

dude, what kind of exhast did the rex have, the white on in the last part of the vids.. the last car racing...
Reply
Old Mar 5, 2003 | 09:36 PM
  #10  
weakGOODJunKieS.com's Avatar
 
Joined: Apr 2002
Posts: 2,593
Likes: 0
From: 99,999, posts aka FrostWhiteDC4
Default Re: sound of vtec engagment (Cuong-nutz)

Damn dial-up
Reply
Old Mar 5, 2003 | 10:07 PM
  #11  
Kataku2K3's Avatar
Honda-Tech Member
 
Joined: Dec 2001
Posts: 5,418
Likes: 5
From: Gresham, Oregon, USA
Default Re: sound of vtec engagment (boi-alien)

It's some piece of **** universal Dragon Fire muffler... Basically just looks like a Tanabe Racing Medallion... I ****** hate all mufflers except fot the ES Oval but at that track they won't let you run header out... Oh well tho, he still db'ed too high at 92db's and had to stop at 10:00pm.... haha
Reply
Old Mar 5, 2003 | 10:18 PM
  #12  
Kataku2K3's Avatar
Honda-Tech Member
 
Joined: Dec 2001
Posts: 5,418
Likes: 5
From: Gresham, Oregon, USA
Default Re: sound of vtec engagment (Kataku2K3)

We had the exhaust routed JDM style, I don't know if you could see it that well on the vid so here are some pics.... Looks okay but yea, I still say **** exhausts...

Reply
Old Mar 6, 2003 | 01:15 AM
  #13  
MiraiZ's Avatar
Honda-Tech Member
 
Joined: Oct 2000
Posts: 7,810
Likes: 0
From: Yokohama, Japan, Japan
Default Re: sound of vtec engagment (Kataku2K3)

are you getting own by a VW Rabbit in that video?
Reply
Old Mar 6, 2003 | 01:39 AM
  #14  
Kataku2K3's Avatar
Honda-Tech Member
 
Joined: Dec 2001
Posts: 5,418
Likes: 5
From: Gresham, Oregon, USA
Default Re: sound of vtec engagment (MiraiZ)

Yea it's weak for a gutted race car with a fully built VR6 motor, his best like a 11.8 though he is a very good consistent driver... Erick's car would smoke the **** out of him with a 1.98L B18C... hahaha **** VW!!!!
Reply
Old Mar 6, 2003 | 01:51 AM
  #15  
eg6turbo's Avatar
Honda-Tech Member
 
Joined: Feb 2003
Posts: 728
Likes: 0
From: SF
Default Re: sound of vtec engagment (Kataku2K3)

man do i have a vid for u guys of my friends h22 del sol...the vtec rocks as u can hear....
right click link and save it to ur hard drive
http://www.imagestation.com/video/vi...238086078&dl=1


[Modified by eg6turbo, 10:52 AM 3/6/2003]


[Modified by eg6turbo, 11:05 AM 3/10/2003]
Reply
Old Mar 6, 2003 | 07:22 AM
  #16  
Baltz's Avatar
Junior Member
 
Joined: Sep 2002
Posts: 675
Likes: 0
From: Nashkill Tenekee
Default Re: sound of vtec engagment (eg6turbo)

man do i have a vid for u guys of my friends h22 del sol...the vtec rocks as u can hear....

http://www.imagestation.com/video/vi...238086078&dl=1


[Modified by eg6turbo, 10:52 AM 3/6/2003]
the h22 in that del sol is the best sounding engine I have ever heard...
makes me want to just go with a h22 instead of building a f22b and boostin'
Reply
Old Mar 6, 2003 | 10:22 AM
  #17  
Bizarre's Avatar
Honda-Tech Member
 
Joined: Dec 2002
Posts: 810
Likes: 0
From: Milton, Ontario, Canada
Default Re: sound of vtec engagment (eg6turbo)

The H22 one is giving me a "PAge cannot be displayed" dam it!!!
Reply
Old Mar 6, 2003 | 11:58 AM
  #18  
Kataku2K3's Avatar
Honda-Tech Member
 
Joined: Dec 2001
Posts: 5,418
Likes: 5
From: Gresham, Oregon, USA
Default Re: sound of vtec engagment (Bizarre)

SOHC = not good for a loud VTEC x-over... just the way things are.... JUN3's in a B series VTEC motor for me...
Reply
Old Mar 6, 2003 | 12:12 PM
  #19  
MachAF's Avatar
Honda-Tech Member
 
Joined: May 2001
Posts: 2,477
Likes: 0
From: MSP
Default Re: sound of vtec engagment (Bizarre)

http://www.we-todd-did-racing.com/Ho...MxeTU0MQ%3D%3D

civic SI is pretty damn loud.
Reply
Old Mar 6, 2003 | 02:11 PM
  #20  
genetsang's Avatar
Honda-Tech Member
 
Joined: Jan 2003
Posts: 974
Likes: 0
From: New Jeru, usa
Default Re: sound of vtec engagment (Kataku2K3)

screw the cars..... nice House!!!!!!!!!!
Reply
Old Mar 6, 2003 | 02:29 PM
  #21  
TedR719's Avatar
Honda-Tech Member
 
Joined: Sep 2001
Posts: 1,407
Likes: 0
Default Re: sound of vtec engagment (genetsang)

My JDM B16 I'll post a video as soon as I get my CTR intake cam in and more
Reply
Old Mar 6, 2003 | 02:35 PM
  #22  
NightHawkC5's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Nov 2002
Posts: 512
Likes: 0
From: Glendale, CA, USA
Default Re: sound of vtec engagment (futuresi)

that h22 was a nice one the noise was out of nowhere
Reply
Old Mar 6, 2003 | 03:25 PM
  #23  
lsvtecvx's Avatar
 
Joined: Nov 2002
Posts: 914
Likes: 0
From: NY, NY, 10705
Default Re: sound of vtec engagment (NightHawkC5)

The original 1.5 Vtec that came in my VX kicked *** with my chipped P28,
I changed the LOOOONNNGGGG gear ratio tranny that came with the car,with a EX tranny, swapped the the intake manifold with a 1.6 mainfold, I had lyin around, and sprayed the biotch till it would die, luckily never died I sold the swap for $450.
Reply
Old Mar 6, 2003 | 04:30 PM
  #24  
Katman's Avatar
Honda-Tech Member
 
Joined: May 2000
Posts: 6,094
Likes: 6
From: PASADENA, CA, USA
Default Re: sound of vtec engagment (NightHawkC5)

Here ya go:

nnnnnnnnnnNNNNNNNNGGGGHHHHAAAAAAAA!

HTH.
Reply
Old Mar 6, 2003 | 04:31 PM
  #25  
bryant's Avatar
Member
 
Joined: Oct 2001
Posts: 9,019
Likes: 1
Default Re: sound of vtec engagment (Katman)

Here ya go:

nnnnnnnnnnNNNNNNNNGGGGHHHHAAAAAAAA!

HTH.
Bwahahaha! That made my day
Reply



All times are GMT -8. The time now is 10:31 PM.