replacing belts
Thread Starter
Honda-Tech Member
Joined: Mar 2008
Posts: 15
Likes: 0
From: bethany, OK, USA
replacing belts
could someone tell me how to R&R AC, Power Steering, and alternator belts
this is my first attempt so any pointer would help, thanks in advance
oops i forgot to mention is my cars is a 92 DA integra very tight space around the belts
this is my first attempt so any pointer would help, thanks in advance
oops i forgot to mention is my cars is a 92 DA integra very tight space around the belts
Last edited by noz; Feb 19, 2009 at 06:43 PM.
Mr. Badwrench
Joined: May 2002
Posts: 14,146
Likes: 2
From: stranger in a strange land
Re: replacing belts
helps to know what we are working on.
if it is a civic or teg,
12mm wrench take the ps pump off move it out of the way, i think the ac tensioner is a 12mm or 14mm, loosen up the weird looking nut, loosen the 12mm jam nut and loosen the adjuster. you will need to remove the engine tq strut 14mm bolts to remove this belt.
12mm bolt on the alternator and use a prybar to pry the alt out of the way.
install in reverse order.
if it is a civic or teg,
12mm wrench take the ps pump off move it out of the way, i think the ac tensioner is a 12mm or 14mm, loosen up the weird looking nut, loosen the 12mm jam nut and loosen the adjuster. you will need to remove the engine tq strut 14mm bolts to remove this belt.
12mm bolt on the alternator and use a prybar to pry the alt out of the way.
install in reverse order.
Thread
Thread Starter
Forum
Replies
Last Post
