rebuild parts question
Thread Starter
Honda-Tech Member
Joined: Jul 2002
Posts: 2,290
Likes: 0
From: Maui, Hawaii, United States
rebuild parts question
Im goin to rebuild the block off a b18c1 , what bearings in the block need to be changed or other parts besides the pistons and rods rings. Any where to get them for decent prices
Honda-Tech Member
Joined: Nov 2000
Posts: 8,388
Likes: 2
From: Rochester, NY
Re: rebuild parts question (turbocivic4)
ACL bearing sets for the RODS and the MAINS are what you want to use, I got mine from camp1320 and they were perfect... and only like $99.
new rings and a cylinder honing are a must. get the block bored and use oversize pistons and rings if it has seen a lot of use and you can spare the cash, only like $20 per cylinder for bore and hone.
new rings and a cylinder honing are a must. get the block bored and use oversize pistons and rings if it has seen a lot of use and you can spare the cash, only like $20 per cylinder for bore and hone.
Thread
Thread Starter
Forum
Replies
Last Post
b16bri
All Motor / Naturally Aspirated
4
Oct 11, 2010 05:39 PM
white4doorsi
All Motor / Naturally Aspirated
5
Jul 6, 2008 01:05 PM