I know I am a dumbass and forgot, but when I chek the engine code and it blinks one slow and then eight times fast, is that 18.....
Thanks

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dohcVTEChatch &raquo;</TD></TR><TR><TD CLASS="quote">I know I am a dumbass and forgot, but when I chek the engine code and it blinks one slow and then eight times fast, is that 18.....
Thanks</TD></TR></TABLE>

yes

 

What is a code 18??


I referred back to this post, but there is no 18!?!?

https://honda-tech.com/zerothread?id=605594

 

did you reset the ecu????? did you try getting the code again? i couldnt find code 18 either, i thought it was just the booze though

 

no, I havent, I will go out and try now, but did you reset it when you threw that code??

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dohcVTEChatch &raquo;</TD></TR><TR><TD CLASS="quote">no, I havent, I will go out and try now, but did you reset it when you threw that code??</TD></TR></TABLE>

i never threw the code, i dont throw codes my car doesnt run

 

....ok well I just reset the ecu and now its not throwing a code at all!?!?

Thats weird for a ecu to throw a code not even labeled in the engine code book?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dohcVTEChatch &raquo;</TD></TR><TR><TD CLASS="quote">....ok well I just reset the ecu and now its not throwing a code at all!?!?

Thats weird for a ecu to throw a code not even labeled in the engine code book? </TD></TR></TABLE>

well if its not throwing a code you have nothing to worry about. you probably just cant count and it was a different code

 

well check engine light came on again?!! I think it was because I reset the ecu and didnt give it enough time to warm up and read the codes again......Anyways its still throwing code 18?!?!

Can anyone tell me what the hell the code is?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dohcVTEChatch &raquo;</TD></TR><TR><TD CLASS="quote">I know I am a dumbass and forgot, but when I chek the engine code and it blinks one slow and then eight times fast, is that 18.....
Thanks</TD></TR></TABLE>
How long is it between the long and short blinks? Could it be two seperate codes?

 

I was just going to say that - Code 10 and Code 8 maybe?

Code 8 - Crankshaft sensor
Code 10 - Intake Air temp. sensor

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Hondaaccordvtec &raquo;</TD></TR><TR><TD CLASS="quote">I was just going to say that - Code 10 and Code 8 maybe?

Code 8 - Crankshaft sensor
Code 10 - Intake Air temp. sensor

</TD></TR></TABLE>
I thought code 8 was for the TDC sensor.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Chiovnidca &raquo;</TD></TR><TR><TD CLASS="quote">
I thought code 8 was for the TDC sensor.</TD></TR></TABLE>


it is

 

What the hell.....isnt that dealing with pistons (top dead center)
It didnt start throwing the code till I replace dist. and got it timed?! So what should I do then if I am throwing this code and is it damaging anything?!......Sorry I am just drawing a blank?
Thanks for the reply's
Dylan

 

your timing might be off, check that and go from there

 

exactly what TeStUdO said your timing might be off, check it correct it and make sure you are clearing your ecu memory correctly by removing the fuse for over ten seconds or unplug your battery for over a half hour then it should clear. if it keeps coming up then you have a problem. also make sure you are reading the blinks right. i don't want you to get offended when i say that but trust me it gets confusing real easily. good luck gloria

 

no, the timing cant be off, I had a local shop do it with a timing gun. But incase they did it wrong, would this be the direct cause? Also, it is the right code for sure...lol........Thanks though