RC Engineering balance/blueprinting results
Injector Cleaning:
Stock D16a6 P/H injectors
Injector # / CC/Min / Pattern
Before:
#1 : 228.0 : Dripping
#2 : 240.0 : Good
#3 : 237.0 : Good
#4 : 239.0 : Good
Average: 236.0 cc/min
Total System LBS/Hr (Static) : 89.90
Injector # / CC/Min / Pattern
After:
#1 : 244.0 : Excellent
#2 : 246.0 : Excellent
#3 : 245.0 : Excellent
#4 : 245.0 : Excellent
Average: 245.0 cc/min
Total System LBS/Hr (Static) : 93.33
Stock D16a6 P/H injectors
Injector # / CC/Min / Pattern
Before:
#1 : 228.0 : Dripping
#2 : 240.0 : Good
#3 : 237.0 : Good
#4 : 239.0 : Good
Average: 236.0 cc/min
Total System LBS/Hr (Static) : 89.90
Injector # / CC/Min / Pattern
After:
#1 : 244.0 : Excellent
#2 : 246.0 : Excellent
#3 : 245.0 : Excellent
#4 : 245.0 : Excellent
Average: 245.0 cc/min
Total System LBS/Hr (Static) : 93.33
I got my injectors back from RC, one of them didn't even work. I shipped it back to them with a couple more junkyard injectors, and they sent them back. They only cleaned one, didn't touch the others and confirmed that yes the one was bad. I had hoped they'd test and clean them all and tell me which would work best with the other three they cleaned. The CC rating on all the injectors didn't match their actual ratings. I put them in the car, and it never ran right. I got yet another set from the junkyard and put them in, and now it runs like it did originally.
I've been hearing bad things that changes have happened at RC and the race teams aren't using them anymore because of "inconsistencies". My experience confirms this. Next time I'll try a different company.
I've been hearing bad things that changes have happened at RC and the race teams aren't using them anymore because of "inconsistencies". My experience confirms this. Next time I'll try a different company.
Thread
Thread Starter
Forum
Replies
Last Post
phearable
Forced Induction
295
Jun 24, 2008 05:32 PM
busychild
Honda CRX / EF Civic (1988 - 1991)
3
Jul 28, 2004 08:27 AM




