vietelement

i just need someone to confirm if my wiring is right or not before i actually wire everything up.

i have a ngk afx wideband that i'll be hookin up to hondata s300 for datalogging

there are 4 wires for it.

red - this one goes to a wire that is on when u crank the car on. so basically i'll wire it up to the radio power wire
black - ground
yellow - (wire to O2 signal input into the ecu) which is the d10pin(ELD)
brown - ground

my s300 is on a p72 obd1 ecu


any confirmations on this would help!