question about hondata
Thread Starter
Honda-Tech Member
iTrader: (1)
Joined: Jan 2002
Posts: 377
Likes: 0
From: Las Vegas, Nevada
question about hondata
1.What is required for a hondata system to properly work?
2.Do you need a stock ecu + the hondata system for it to work, or does the hondata system replace the stock ecu?
3.Does hondata come with stock program and then you have to tune?
2.Do you need a stock ecu + the hondata system for it to work, or does the hondata system replace the stock ecu?
3.Does hondata come with stock program and then you have to tune?
On Fire!
Joined: Aug 2001
Posts: 3,078
Likes: 1
From: Iowa
Re: question about hondata (inzane)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by inzane »</TD></TR><TR><TD CLASS="quote">1.What is required for a hondata system to properly work?
2.Do you need a stock ecu + the hondata system for it to work, or does the hondata system replace the stock ecu?
3.Does hondata come with stock program and then you have to tune?</TD></TR></TABLE>
You need a stock ecu socketed, go to hondatas site for the ecu chart (ecu's you can use for your specific car) than you need the actually hondata box.
If you do the s100 its just a chip with a board on it that plugs into the stock ecu, the s200 is a box that sits outside of the ecu and plugs into the ecu.
If you do the new s300 its a board that plugs into the chip socket, kinda like the s100. Hondata or your hondata dealer will provide you with a base map for your car depending on your mods and mainly the injector size. Than you go and get it tuned. This is just a basic and broad explenation of it.
2.Do you need a stock ecu + the hondata system for it to work, or does the hondata system replace the stock ecu?
3.Does hondata come with stock program and then you have to tune?</TD></TR></TABLE>
You need a stock ecu socketed, go to hondatas site for the ecu chart (ecu's you can use for your specific car) than you need the actually hondata box.
If you do the s100 its just a chip with a board on it that plugs into the stock ecu, the s200 is a box that sits outside of the ecu and plugs into the ecu.
If you do the new s300 its a board that plugs into the chip socket, kinda like the s100. Hondata or your hondata dealer will provide you with a base map for your car depending on your mods and mainly the injector size. Than you go and get it tuned. This is just a basic and broad explenation of it.
Thread
Thread Starter
Forum
Replies
Last Post
glagola1
Forced Induction
16
Aug 22, 2003 08:51 PM