ok well i finially got around to putting a LSD in my CRX, and everything went pretty smooth, followed the helms by the nose.. and no problems till i get it all back together and the ****** won't go in reverse, and it grinds into 5th.. i take it all back apart, and everything looks right.. i didn't touch the mainshaft or countershaft, simply removed them together, and took out the differencial??.. so i dun no,.. any tranny guys here?.. i'm fixing to head out and pay someone to fix it.. if worse comes to worse, my local pick and pull has them for 75 bucks, and i'll just pay another 100 to have a professional install it.. but i dun no, my best friend who had done this before was helpping me, and he didn't get it?.. any advise?

 

ttt

 

just get it done by the shop.. and watch them and learn from your mistake, its the easiest way to learn is from watching a pro

 

Check if you haven't touched anything in the shifting mechanism. Forks, rods, etc.

 

When u put back da mainshaft did u make sure the reverse gear was still there its a small shaft with 1 gear which sits alone n lines up with da mainshaft check dat out

 

Having the same problem. But I took everything apart(had the case powercoated and changed some gears).