Port and polishing in Bay Area?
i'm in the bay area, and i mailed my head down to los angeles. i'm sure there are plenty of machine shops up here that are great, but I wanted mine done with a little more TLC, and also wanted a shop that actually had a vehicle to back up their claims. I suggest http://www.alaniztechnologies.com . you'll have to call a bunch of times, because Joe's usually working and can't hear his phone, but his work is awesome. When you talk to Joe, tell him your budget (the most important part) , your final build up wishes (like not what you want to do at the time, but your overall goal), and how much time you're willing to wait. But no matter what you chose, just inspect the work, and make sure it's what you like! good luck!
i sent mine to DPR in socal, dan did a great job, i have had friends send theres to him also with good results but in the bay area you can try ummm FUDGE i can't remember the name it starts with an R and is in Concord.... ill edit my post when i remember or if someone knows let me know but i do recomend DPR he will spend time with you on the phone and go ever everything you want to do then custom do your head the best way to go with what you are planning
Thread
Thread Starter
Forum
Replies
Last Post
Jesse1920
Engine Machining & Assembly
0
Sep 18, 2017 07:20 AM
Sometimes it's hard not to want to live in SoCal...just a little...NorCal is probably close enough..
RR98ITR
Road Racing / Autocross & Time Attack
7
Aug 19, 2003 04:49 PM




