port and polish
Thread Starter
Junior Member
Joined: Dec 2006
Posts: 53
Likes: 0
From: San Diego, CA, United States
port and polish
ive been looking up port and polish and i cant exactly figure out how much it would benefit my car, for axample ...
"Street/Strip Port and Polish and Competition Valve Job
This includes porting intake and exhaust bowls and short side radius
Match intake and exhaust 36 mm into ports
Competition mult-angle valve job
Hand lapped & vacuum tested valve seats
Lap deck and gasket surfaces
Deburr, clean, and reassemble"
... it said that that would cost around 700 i think, but my question is, how would this help out my cars performance and is it really worth it?
"Street/Strip Port and Polish and Competition Valve Job
This includes porting intake and exhaust bowls and short side radius
Match intake and exhaust 36 mm into ports
Competition mult-angle valve job
Hand lapped & vacuum tested valve seats
Lap deck and gasket surfaces
Deburr, clean, and reassemble"
... it said that that would cost around 700 i think, but my question is, how would this help out my cars performance and is it really worth it?
Honda-Tech Member
Joined: Jul 2006
Posts: 73
Likes: 0
From: Stockton, CA, United States
Re: port and polish (million)
Yes its worth it.The Better flow you have the more power. Search (upper right/ RED letters) everything you need to know is right there. You'll understand.
Joined: May 2002
Posts: 3
Likes: 1
From: banned NC
Re: (Combustion Contraption)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Combustion Contraption »</TD></TR><TR><TD CLASS="quote">Totally not worth it.</TD></TR></TABLE>
agreed
agreed
Honda-Tech Member
Joined: Jul 2006
Posts: 73
Likes: 0
From: Stockton, CA, United States
Re: (dfoxengr)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dfoxengr »</TD></TR><TR><TD CLASS="quote">
agreed </TD></TR></TABLE>
Sorry..I meant port and polish is worth it...Paying $700 definitely isn't. You can do way more bigger upgrades for that much money. It all depends what your building the motor for. If you are going all out race, PnP is a must. If its not that serious than there are alot of other options for $700. Heck you could even just get yourself the equipment to do it yourself if you feel adventurous and willing and have money left over for some upgrades. (IMO)
agreed
</TD></TR></TABLE>Sorry..I meant port and polish is worth it...Paying $700 definitely isn't. You can do way more bigger upgrades for that much money. It all depends what your building the motor for. If you are going all out race, PnP is a must. If its not that serious than there are alot of other options for $700. Heck you could even just get yourself the equipment to do it yourself if you feel adventurous and willing and have money left over for some upgrades. (IMO)
Thread
Thread Starter
Forum
Replies
Last Post
vg7z
Honda Civic / Del Sol (1992 - 2000)
12
Jan 17, 2008 09:39 AM
HKSone
All Motor / Naturally Aspirated
2
Mar 9, 2005 09:13 PM
