Ok I just bought a GSR block that came with a crank to go with my B16 head. I have a set of LS rods and an LS crank. My question is what all would I have to do to make get the LS parts fit into the GSR block so I can get the 89mm stroke?

 

you have to remove or bend the oil squirters out of the way of the crank counterweights.

 

ah ok thnx alot!!!

 

what pistons do you plan on using?

 

most ppl block off the squirters if they use forged pistons. they use http://www.accountwizard.com/c...=MISC