Someone know what is the voltage for the Throttle Position Sensor ( on the throttle body) for a 96up ITR?

I think it's .48 volt for a GSR, is this right?
dont know for a ITR

 

.45 (idle) to 4.5v (WOT)

 

Thanks a lot for the information!!!

Here's my complete situation :

I have a 98 GSR with a Overbored TB to 63.5mm,
with the stock ECU the idle is perfect @750rpm

BUT when i put my 97 ITR ECU the idle is at 1100rpm!!!

Do you know why? is the TPS voltage the same on a ITR TB? vs a GSR TB?

 

yes the voltage is teh exact on all b-series

 

ok thanks! but do you know my idle is diffrent?

 

you might have a problem with the ecu i have seen this happen before what year itr is it from. sounds like you are getting to a sensort to try to feed more fuel to the motor.