Andres-eh2

Chipped a 11F0 p06 to vtec. The ECU with throw a VTEC code if i unplug the vtec wire and after I connect it back the CEL will go away and still not hit vtec. I am also using hondata but that doesnt have anything to do with it. When we went out to tune, hondata's datalogger saw it was hitting vtec but i could hear or feel xover. put my bros p28 with my tuned map and it works.

I Need VTEC!!!






Modified by Andres-eh2 at 12:38 PM 5/18/2006


Modified by Andres-eh2 at 12:45 PM 5/18/2006

JSPECSIR

please do not take this the wrong way but your solder job looks like doo doo. this could be your problem.

Relic1

the diode in upper left corner of the second pic (D11) is in backwards.
clamping diode, with it in backwards it will kill the output line.

Andres-eh2

great! thanks. someone else on a board told me the same thing so i confirmed it with what you just told me.

NJcoupe

What is the watt-age of your soldering iron? be shure not to burn out the board, I've done this like twice, it sucks.