i have a H2B set up on my civic EF, it is a JDM H23A VTEC stock motor with bolt ons. i am using hondata s300 to run the car however, the car keeps overheating. i already replaced the fan switch and thermostat and bled the system as best as i know how. i noticed that the fan does not turn on when it starts to over heat, but when i loop the fan switch plug it turns on or when i do the engine overheat override on hondata. does anybody know what might be wrong?

the second problem i am having is my car is running lean at least that's what i think, i look at the AF and it is at 1.0 - 0.98. i cant get it tuned yet because i dont have the money at the moment, im using a hondata stock h22 base map with 440cc injectors. can anybody point me to the right direction on what i should adjust or look at? also i wired a lc-1 wideband however i dont know how to pull it up on hondata or if i wired it right i followed this guide http://www.xenocron.com/install/Xeno...etup-Guide.htm

please help me!!

 

wat is the fan switch temp set at in the s300

 

im not sure, where do i find it? i mean i'm using a h22 hondata basemap so im assuming it is where it needs to be

 

bump

 

ttt

 

Check Parameters tab and then Protection in SManager.

 

ok ill check, thanks


does anybody know if it would be running lean because i havent changed the stock fuel pump on the hatch?