Yea so since I'm halfway through my power steering conversion, I put up my AEM p/s pulley for sale. Well in the process of trying to get it off, I jacked it up reaaaal good. No way in hell it's usable.

So I tell the buyer I'm sorry and I'm about to rip up his check, but I called AEM first.

Robert Green their tech/claims guy is sending me a used pulley that was slightly scratched during install.... ....free of charge. Just thought I'd give them some props

Btw I still can't get the pulley off

I took the pump out, the pulley is sitting in my bench vice, and so far 3 feet of breaker bar, a propane torch, and an impact wrench have all failed miserably.
Not to mention a 1/2" --> 3/8" adapter I broke (Crafstman )

Any ideas? I feel like if I put any more breaker bar on it, I'm going to break my 1.25" particle board workbench

 

Oops wrong forum but I guess this will work...

 

is the nut reverse threads?

 

Ha! I began to wonder the same thing, but the impact wrench wouldn't break it loose going forward either....