I bolted my crank back on my block and when i was turning the crank shaft with my hand i would feel the crank rubbing an oil squiter.

why?

Did i need to put them back in a special order???

 

what block? what crank?

 

You might have to **** the oil squirter over to ensure that it clears the counterweight.

 

Yea just pull out the crank again really quick and hit the oil squirter with a hammer.. j/k but you should be able to move it just enough to clear by hand. You are using the same crank as the block right? Just making sure that it isn't just a clearance issues of a hybrid block . If it gets or has any crimp in it from getting bumped then get a new one..

 

o yea its a b16 block and crank?

 

Yea, just straighten them if possible.. Like i said if there is anything majorly wrong with them such as crimps or bends then just replace them.