hi everyone im now in here and i have a question for you.

i recently swaped a b16 into my ef and of course not every swap gose smoothly, i saw that i was leaking oil from under the car. i thought it was the axle seals so i changed them leaking would not stop. then i changed the oil pan gasket it still leaking. i checked the block no leakst there thank god. so i really dont know where its comming from. if anyone have any knowledge about this i would really need it right now.

 

Remember: an oil leak never goes up, always down. Follow the oil up the motor and when it gets dry, thats where the leak is. Common ****: distributor o-ring, valve cover gasket, maybe a front main seal.

 

ok so ill start from the top down. the thing is all the oil is comming from the driver side

 

You'll probably have to take the timing belt cover off then. Could be a cam seal on that side, or the front main. Probably the cam seals.

 

yeah ill do that lets see how good of a job did these guys do with the cam intalation.

 

anyone else? need help