OBD2B distributor conversion to OBD1 dizzy almost finished but ran into problem
Thread Starter
Honda-Tech Member
Joined: Sep 2004
Posts: 29
Likes: 0
From: Florida
OBD2B distributor conversion to OBD1 dizzy almost finished but ran into problem
Everything is done but now have a simple problem, and dont have my books here with me to use as a guide, so please help.
The heavy gauged wire on the 2 wire plug that is BLACK/Yellow tracer
on the OBD2B harness this wire is not there, so my question is:
-how to wire?
is it a switched power wire or constant or is it at the ignition switch, blah blah blah
thanks
The heavy gauged wire on the 2 wire plug that is BLACK/Yellow tracer
on the OBD2B harness this wire is not there, so my question is:
-how to wire?
is it a switched power wire or constant or is it at the ignition switch, blah blah blah
thanks
Thread
Thread Starter
Forum
Replies
Last Post
blackcrx16
Honda CRX / EF Civic (1988 - 1991)
1
Dec 31, 2006 04:23 AM
